● Adopt high-performance ARM Cortex-M7
● 80mm/s print speed
● Support CPCL and ZPL print protocol
● Equipped with 256 MB NAND FLASH
● Support TTF vector font
● Equipped with Micro-USB interface, support 5V/2A charge
● Equipped with 1.3-inch OLED display
● Support Bluetooth 4.0/LE
● Optional Wi-Fi (802.11 b/g/n)
| Model | iMOVE T3pro | |
| Product Photos |  | |
| Print Method | Direct Thermal | |
| Resolution | 203 dpi | |
| Print Width | Max.72 mm (576 dots) | |
| Print Speed | Max.80 mm/s | |
| Media | Media Type | Thermal Receipt Paper, Label (Gap) |
| Media Width | 55 mm to 80 mm (Optional 37 mm to 63 mm) | |
| Media Capacity | Max. O.D 57 mm | |
| Hardware | Processor | ARMv7E-M Cortex-M7 32-bit RISC Processor |
| RAM | 32 MB | |
| Flash | 256 MB | |
| Communication Interface | Standard | micro-USB , Bluetooth 4.0 BLE/2.1+EDR (Dual Mode) |
| Optional | Wi-Fi（802.11b/g/n) | |
| Sensors | Standard | Printer cover open detection, Out-of-paper detection, Gap detection (transmission, fixed, middle) , Black mark detection (reflective, right side of print back), TPH Temperature detection |
| Software | Drivers | Windows 7/8/8.1/10, Windows Server 2008 R2/2012/2016, Linux, Mac OS X (or macOS) |
| Power | Adapter Input | AC 100 ~ 240 V, 50/60Hz |
| Adapter Output | DC 5V/1A | |
| Battery | Li-ion, 7.4V/1800mAh | |
| Reliability | TPH Life | 50 km |
| Levels of Protection | IP42 | |
| Drop Test Standard | 1.5 m |
Manual
SDK
Driver
Utility
